850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Oil Pan: All Technical Service Bulletins
Oil Sump - Revised Installation
Group:
21
No.
811
Date:
11/93
Oil sump, installation
850 1993-->
REFERENCE: 31804/1 (ENGLISH); 6/92; B5204, B5254 AND B6304 ENGINES
Oil sump, installation
A new method of replacing/reinstalling the oil sump in the car (or when the gearbox is still attached to the engine) has been developed to help ensure that
the sump is not subjected to stress.
Installation of oil sump
1.
Apply sealing compound (p/n 1161059-9) to sump sealing surface.
2.
Mount sump in position using all bolts. Do not tighten bolts, allow sump to remain loose.
3.
Press sump against gearbox and tighten bolts (1, 2, 3, 4) to 2-3 Nm (1.5-2.2 ft. lbs.).
4.
Tighten bolts (5) between sump and gearbox initially to 25 Nm (18 ft. lbs.) and finally to 50 Nm (37 ft. lbs.).
5.
Do not loosen bolts 1, 2, 3, and 4. From rear to front torque all bolts (including 1, 2, 3, and 4) to 17 Nm (12 ft. lbs.).