850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Start function test 1 to mad off posted DTCs for faults traced by the control module's on-board diagnostic system(OBDS).
-
Ignition on.
-
Press button. Hold down approx. 1 second.
-
Read off the LED flashes.
If LED does not Indicate when button pressed: - Check the Diagnostic socket
C5
Check if the control module is activated for self-adjustment
^
Start the Function test 1 BA3 according to the Service Manual.
-
Read of the DTC.
Diagnostic trouble code 5-1-1 posted:
The control module is activated for self-adjustment of the shutter motor end position.
-
Continue with Testing the car 06.
If DTC 5-1-1 Is not posted:
Start of Function test 4 and entering command code 9-9-9 has failed.
-
Carry out Setings for activation D2.
D8
Test driving the car
-
Drive car a few minutes at a speed over 30 km/h (18 mi/h). The control module will carry out the self-adjustment while the car is being driven.
-
Stop the car and leave ignition on for at least 2 minutes so the control module can store all the values.
-
Continue to D7.
D7
Checking self-adjustment is now complete
-
ignition on.
^
Start the Function test 1 BA3 according to the service Manual.
-
Read of the DTC.