volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Passenger Compartment Sensor|Page 6288 > < Passenger Compartment Sensor|Page 6285
Page 1
background image

Cabin Temperature Sensor / Switch: Service and Repair
Passenger Compartment Sensor

(ECC Only)

1. Ignition off

The passenger compartment temperature sensor is located behind the driver or passenger grab handle, where there is an inlet hole in the inside
cover.

2. Expose passenger compartment temperature sensor:

-

Remove grab handle (2 screws).

-

Bend back panel B-post.

-

Undo cover.

-

Bend out corner of inside cover.

3. Remove connection:

Undo connection from passenger compartment temperature sensor

4. Undo passenger compartment temperature sensor:

Undo the screws (2) holding the passenger compartment temperature sensor.

5. Install:

-

Passenger compartment temperature sensor (2 screws).

-

Connector.

-

Cover panel.

-

Panel B-post.

-

Grab handle (2 screws).

Passenger Compartment Sensor|Page 6288 > < Passenger Compartment Sensor|Page 6285