850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Maintenance Required Lamp/Indicator: Service and Repair
Vehicles With VDO Instrument Panel
Prior to model year 1996 the service reminder indicator (SRI) on a VDO instrument panel could be reset either manually or with the use of a Volvo
Diagnostic key (ST).
Resetting (SRI) manually prior to model year 1996
Diagnostic Connectors
The Service Reminder Indicator (SRI) must be reset using the Diagnostic Connector found in the engine compartment. (Specificity Diagnostic
Connector "A")
1. Switch ON the ignition.
Diagnostic Connector A In Position #7
2. Select position 7 on Diagnostic Connector A.
3. Depress the button four (4) times, shortly but distinctly.
- You have now entered Test Mode 4.
- When the LED emits a steady glow, system is ready to accept code.
CODE: 1-5-1
Display Text: Zero Service Timer
Remarks: Service reminder indicator goes out.
4. Enter first digit while LED is still glowing. Wait until LED starts to emit steady glow again before entering second digit. Repeat procedure for
third digit.
5. Wait for conformation from control module by LED giving a couple of rapid flashes. Zeroing is completed and Service Reminder Indicator is
OFF.
The indicator lamp illuminates for approx. 2 minutes each time the engine is started until service has been performed and counter reset.
Resetting (SRI) with Volvo diagnostic key (ST) prior to model year 1996
-
Insert memory module in ST. (check that you are using the correct module)
-
Connect ST connector to connector terminal A or B (gray or black)
-
Connect battery cables to battery, red to + terminal.
-
Switch ignition on.
-
Scroll down to A7 COMB. INSTR.
-
Go to DTM 4 - Settings (Resetting service counter and changing transmission speed)
-
Follow instructions on display.