volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Parking Lamp > < Diagram Information and Instructions|Page 8989
Page 1
background image

License Plate Lamp: Service and Repair

License Plate Light, Bulb and Lamp Glass.

Replacing bulb and lamp glass

Remove the two screws holding the tamp glass (TORX 10 or crosshead screws).

Remove lamp glass carefully with a flat-bladed screwdriver.

Pull blown bulb straight out.

Replace bulb.

Test

Replace lamp glass if it shows signs of cracking

NOTE: RH and LH lamp glasses in 5-door models have different part numbers.
Cut off guide pin in earlier models which do not have a hole for this.

Do not tighten screws too hard as lamp glass is plastic.

Parking Lamp > < Diagram Information and Instructions|Page 8989