850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Remove protective cap from bleed nipple and connect collecting bottle hose. Open nipple about one full turn.
-
Press brake caliper pistons back using tool 999 2809 (2 off), until pistons reach bottom of caliper. Leave tool on caliper.
-
Pressurize braking system with bleed unit.
-
Drain off 2-3 dl (0.6-0.8 pt) brake fluid.
-
Close bleed nipple and remove hose.
-
Install protective cap.
[LL6]
-
Depressurize braking system using bleed unit. Remove tool from brake caliper.
[LL7]
-
Install brake pads, rear.
-
Install brake pads, as per KB7. Then continue as per instructions below. See: Brakes and Traction Control/Disc Brake System/Brake Pad/Service
and Repair
-
Depress brake pedal a few times.
-
Repeat procedure as in steps LL4 - LL7, on the other rear brake caliper. Then go to LL8.
Replacement brake fluid, front [LL8]
-
Remove protective cap from bleed nipple on one of the front brake calipers. Connect collecting bottle hose. Open nipple, about one turn.
[LL9]
-
Push brake caliper piston to bottom of caliper using a bolt clamp. See illustration. Leave bolt clamp in pushed in position.