850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Pressurize braking system with bleed unit. Drain off 2-3 dl (0.6-0.8 pt) brake fluid.
-
Close bleed nipple and remove hose.
-
Install protective cap.
[LL10]
-
Depressurize braking system using bleed unit.
-
Remove bolt clamp from brake caliper.
-
Depress brake pedal a few times.
-
Repeat procedure as per steps LL8-LL10, on the other front brake caliper. Then continue with LL11.
Removing bleed unit [LL11]
-
Remove bleed unit connector from brake fluid reservoir.
Finishing [LL12]
-
Depress brake pedal repeatedly until brake pistons are in normal position.
-
Check brake fluid level and install reservoir cap.
-
Clean off any brake fluid spillage with lukewarm water and car wash shampoo.
Installing wheels [LL13]
-
Check that brake disc and rim contact surfaces are clean.
-
Grease hub rim center guide with anti-rust agent 116 1038-3.
