850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Hose/Line HVAC: Service and Repair
A/C Suction Hose/Line
Replacing Receiver/Drier or Suction Pipe
Special tools:
999 5472
999 5473
Warning! Follow the safety instructions for work on air conditioning systems. Refer to: "Heating and Air Conditioning : Technical Safety
Information" See: Heating and Air Conditioning/Service Precautions/Technician Safety Information
-
When replacing a receiver / drier always replace O-rings in pipes and quick-release connectors
-
When replacing a suction pipe follow these instructions but only replace the suction pipe.
Preparations
-
Disconnect the battery negative lead
-
Drain the refrigerant from the system
Removal
Removing the fresh air hoses (N4) from the control module box:
-
Lift the data link connector (DLC) from the control module box
-
Remove the fresh air hoses from the control module box
-
Remove the connection nozzle for the inlet hose at the fan shroud (2 clips).
-
Disconnect the pipe couplings at the compressor
-
Release the quick-release connectors on the receiver/drier (N8)
-
Note! Use quick-release connector puller 999 5472.
-
Remove the cover from the right-hand headlamp
-
Remove the screw from the bracket for the receiver / drier
-
Remove the air baffle (2 screws).
Removing the receiver / drier and bracket:
