volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control Panel and Fuse Box Replacement|Page 5453 > < Underhood Panel|Page 5450
Page 1
background image

Central Electrical Unit: Service and Repair
Control Panel and Fuse Box Replacement

Electrical Control Panel

The electrical control panel is designed to take optional extras. Fuse 

# 16 has been set aside for that purpose. If fitting more accessories, lift electrical

control panel out and use spare slots (

4, 18, 36 or 38).

Fuse Numbering Key

For fuse location and ratings, see inside cover or See: Fuse/Locations

Control Panel Removal

If you are not sure if a fuse has blown:
-

Turn ignition on.

-

Test to see if there is power at both test points on the fuse.

-

Remove battery negative lead.

-

Remove windshield wipers and cover panel. See: Wiper and Washer Systems/Wiper Motor/Service and Repair (Front Wiper Unit and Motor.)

-

Remove electrical control panel cover (4 screws).

-

Remove 4 electrical control panel screws.

-

Open cable run.

-

Lift electrical control panel out.

-

For installation, follow steps in reverse order.

NOTE:  Check that there is a tight fit between the electrical control panel and firewall. For repairs to leads and connectors, use Volvo spares kit 914

Control Panel and Fuse Box Replacement|Page 5453 > < Underhood Panel|Page 5450