850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Install New Sensor
^
Install / reconnect:
-
Knock sensor.
-
Knock sensor connector.
Tighten to 20 Nm (14.8 ft lb).
NOTE: Front Knock Sensor must be tightened in the 4 o'clock position and Rear Knock Sensor in the half-past five position.
Installing Intake Manifold
^
Install:
-
New gasket with four lower intake manifold screws.
NOTE: Check that there are no foreign bodies in the intake manifold before installing it.
-
Intake manifold.
NOTE: Ensure that crankcase ventilation hose is not trapped between cylinder head and intake manifold when tightening.
-
Locate the EGR valve on the pipe.
Tighten EGR valve pipe coupling to 50 Nm (37 ft lbs).
-
Three upper intake manifold screws.
Tighten all screws to 20 Nm (15 ft lbs).
-
Support bracket.
-
Dipstick.