850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Oil Separator: Service and Repair
OIL TRAP SEAL REPLACEMENT
Remove Intake Manifold
^
Remove the intake manifold.
Remove:
^
Hose from oil trap.
^
Intake manifold bracket.
^
Two oil trap screws.
^
Oil trap.
^
Check that oil trap seal surfaces are clean.
EARLY MODELS:
Install Oil Trap
^
Install new seals on the trap (coat seals with oil), tighten screws to 20 Nm (14.8 ft lb).
^
Install intake manifold bracket, finger tighten lower screw.
NOTE: If oil trap tips/turns when tightening, check that the seals have not lost their necks on the oil trap.
LATE MODELS: