850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Assemble fuel pressure gauge 999 5011 and new adapter hose 951 2614.
-
Use foam wrapping around the fuel pressure gauge and all metal joints to avoid scratching the interior of the car or damaging the exterior paintwork.
CONNECTING THE FUEL PRESSURE GAUGE
Operations:
-
Remove the cover over the throttle pulley.
-
Detach protective cap from the fuel pressure line nipple.
-
Attach the adapter hose nipple loosely to the nipple on the fuel pressure line nipple. The nipple will be tightened later.
-
Arrange hose as illustrated.
Note!
Ensure that the hose follows the rubber trim on the cowl cover and then out of the engine compartment at the rear comer of the hood, with the adapter
hose joint at the T-valve outside the engine compartment. so neither the hood or the hose are damaged when the hood is closed.
Caution!
Check that hose cannot contact the throttle pulley especially in wide-open position.