850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Fig. 18 Passengers Air Bag Module To Instrument Panel Pad Attaching Screws
10. Remove eight Torx screws and six nuts retraining air bag to instrument panel pad, Fig. 18
Fig. 19 Positioning Wire In Straps
11. Reverse procedure to install, noting the following:
a. Position two ft. of electrical wire through straps, Fig. 19
b. Position air bag into place while keeping wire stretched tight.
c. Place screws in module to secure position, then release and remove wire.
d. Tighten attaching bolts and nuts to torque listed in "Tightening Specifications".
e. After completing installation, arm SRS as described under "Air Bag System Disarming and Arming".