volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1240 > < Diagram Information and Instructions|Page 1238
Page 2
background image

Free the latch lugs that hold the kjckdown switch in place by pushing a screwdriver into the opening in cowl-panel. Push out switch with throttle cable.

From the engine compartment side, make sure no remnants of the latch lugs remain between the insulation and cowl-panel.

Q4

Installation of new throttle cable/kickdown switch

Ensure that connector is correctly positioned upright.
Make sure latch tugs engage cowl-panel.

Q5

Reattach throttle cable to AP

Make sure rubber cushion is in place in the hole on AP. Use retainer in AP to fasten cable. Make sure bead on the end of cable is anchored at the bottom
of the retainer.

Cars with SRS:

Diagram Information and Instructions|Page 1240 > < Diagram Information and Instructions|Page 1238