850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Alignment: Service and Repair
Front
Toe-In
Adjust toe-in by altering length of tie rods (track rods) after undoing locknuts. Increasing tie rod length increases angle and vice versa. Correct values are
shown in table above.
NOTE: Length of tie rods must not differ by more than 2 mm (0.08 inch) as measured between end of thread and locknut. Treat threads with anti-rust
agent, P/N 1161432-8, after tightening nuts.
Camber
