850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
1. Assemble mount on shock absorber:
a. Bumper and gaiter.
b. Washer (when replacing shock absorber, replace existing stop washer with 3 mm (0.19 inch) washer).
c. Spring compressed to length of approximately 300 mm (11.81 inch).
d. Spring seat.
e. Fit spring ends in spring seats.
2. Install retaining nut. Tighten to 70 Nm (52 ft. lbs.). Use socket and counterhold.
3. Install:
-
Suspension strut mounting.
-
Washer and nut. Tighten nut to 70 Nm (52 ft. lbs.). Use socket and counterhold.
4. Remove spring clamps. Install suspension strut in body with new nuts Tighten strut mounting nuts (three) to 25 Nm (18 ft. lbs.).
