850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
10. Replace shock absorbers in car. Tighten mounting bolts a few turns.
11. Remove:
a. Spring mounting nut.
b. Spring from car.
12. Transfer spring rubber spacer, auxiliary spring and lower mounting to the new spring.
13. Install the new spring.
a. Locate the end of the spring in the trailing arm recess and locate the mounting washer guide pin in the hole on the trailing arm.
b. Install a new nut on the mounting washer. Tighten to 40 Nm (30 ft. lbs.).
14. Place a jack under the trailing arm and lift.
15. Install the shock absorber onto the lower mounting. Tighten upper shock absorber mounting bolts to 25 Nm (18 ft. lbs.).
NOTE: Check that the spring is correctly positioned in the upper spring seat.
