850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Installation
NOTE: Turn the bushing so that the large inner sleeve diameter faces the body.
1. Press the new rear axle link into place. Use the same tool as for removal.
2. Remove tool. Install a new mounting bolt and nut on the trailing arm rear axle link. Do not tighten the nut yet.
3. Install the trailing arm onto the body guide pin.
4. Install bolts to trailing arm bracket loosely. Use new bolts.
5. Tighten bolts:
a. First tighten the bolt through the rear axle link bracket. Tighten to 105 Nm (78 ft. lbs.), and angle-tighten to 90°.
b. Then tighten the three bracket bolts to 65 Nm (48 ft. lbs.), and angle-tighten to 60°.
c. Finally, tighten the nut on the trailing arm-rear axle link bolt to 65 Nm (48 ft. lbs.) and angle-tighten to 120°. Use angle gauge.
6. Install:
a. The brake pipe to the mounting clips.
b. The silencer bracket bolt.