volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Shift Cable, A/T|Service and Repair|Page 4134 > < Shift Cable, A/T|Service and Repair|Page 4132
Page 4
background image

L1O

Push rod arm on transmission forward to position P

NOTE:  Do not move the transmission cable. The transmission cable position must not be altered.

Make sure you are in Park by trying to roll the car.

Turn the rod arm to the next position (R).

Apply grease (1161241-3) sparingly to the rod arm pin.

NOTE:  Do not change the position of the lever.

L11

Carefully reinstall the cable on the studs and rod arm pin.

Make sure that neither the transmission cable lever or rod arm change position!

Secure with washers (early versions only) and nuts.

Tighten nuts in order lightly. Then torque to 25 Nm (18 ft. lbs).

Reinstall washers and locking clip on rod arm.

L12

Check adjustment

Lever in N position. Push lever forward, do not touch lock button. Play should be felt.

Lever in D position. Push lever backward, do not touch lock button. Play should be felt.

L13

Reinstall:

Shift Cable, A/T|Service and Repair|Page 4134 > < Shift Cable, A/T|Service and Repair|Page 4132