volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Flywheel > < Drive Shaft Nut - Updated Part|Page 4290
Page 5
background image

- Link/ball joint to stub axle. Remove sleeve 9995562 from the ball joint. Use new nuts on the screws. Torque: 40 Nm (30 ft. lbs)

- Link to anti-roll bar. Use a new nut. Torque: 50 Nm (37 ft. lbs)
- Brake hose bracket.

X9

Reinstall on both sides:

- Wheels. Lubricate the hub center location dowel for the rim with rust inhibitor 1161030-0. Tighten the studs lightly. Then torque diagonally.

Torque: 110 Nm (81 ft. lbs).

NOTE! See also Specifications, Tightening torques. See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications 

X10

Check transmission oil level.

See operations H1-H5. See: Automatic Transmission/Transaxle/Service and Repair/AW 50-42 Repair and Maintenance/H. Oil Inspection 

Flywheel > < Drive Shaft Nut - Updated Part|Page 4290