850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Axle Nut: Technical Service Bulletins
Wheel Hub - New Nut For Rear Axle
SECTION
7
GROUP
77
NO.
803
DATE
July -95
New nut for wheel hub
800
REFERENCE: TP 6002201, SECTION 6, 7 (65, 72-77), REAR SUSPENSION; 850 1992- THIS SERVICE BULLETIN SUPERSEDES SB 60-804
DATED MAY 1995.
New nut for rear wheel hub
A new nut for the rear wheel hub will be introduced into production on all 850 models.
Factory Code:
Model:
Chassis No:
1
854
1219646
1
854
2221178
2
855
2121509
The introduction of the new wheel hub will result in the following changes:
-
The shaft end thread size has been increased from 20 mm to 22 mm.
-
New, self-locking nut with 22 mm thread.
-
The new nut is re-usable.
Note
The rear wheel hub threads must be oiled before reinstalling the nut.
Tightening torque for the new nut is 120 Nm (89 ft.lbs) + 35°.
