850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Shift Cable: Service and Repair
Selector Cables
Special Tools
-
Fitting tool No. 999 5511, or equivalent
-
Refer to special tool section for additional tool information. See: Tools and Equipment
Removal
1. Remove:
-
Battery negative cable.
-
Air Cleaner (ACL) and intake pipe.
Turbo models only: Disconnect timing valve from ACL.
2. Remove:
-
Clip and washers from levers.
-
Clips from cable bracket.
-
Selector cables from cable bracket.
NOTE: The selector cable runs in engine compartment.
3. Remove:
-
Cigarette lighter panel/storage compartment (two bolts at back).
-
Some models: DLC from panel.
-
Cover from under handbrake lever.
-
Storage compartment lid.
Disconnect shift lever bellows (gaiter) from tunnel console.
-
Press shift lever bellows (gaiter) rear fastener from underneath through the gap under the parking brake lever.