850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Shift Cable: Service and Repair
Selector Cable Bushings and Dampers
1. Remove Air Cleaner (ACL).
Turbo models only:
Disconnect timing valve from ACL.
2. Remove clips and washers from levers
Press the old bushings out of the ring terminals.
Only If replacing damper units on cable bracket:
Remove clips from cable bracket and remove bracket assembly from transmission.
3. Install the new bushings in the ring terminals.
NOTE: Make sure bushings/openings are positioned as illustrated.