850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Windshield: All Technical Service Bulletins
Windshield Support Strip - Revised
SECTION
8
GROUP
84
NO.
814
DATE
Aug. 1996
Installing windshield support strip
850
REFERENCE: TP 8201201, SECTION 8 (82-86, 88), INTERIOR, EXTERIOR; 850 1993-
New design of windshield support strip
(Applies to top of windshield)
A modified support strip, P/N 9154226-6, has been developed to increase the contact surface for PUR adhesive. The support strip was introduced into
production from the following chassis numbers:
Model
Factory Code
Chassis no.s
854
2
120413-
855
2
029185-
Although the new support strip is the same height as before, the support lip in contact with the upper body flange has been removed. This increases the
contact surface of the PUR bead along the upper body flange, increasing the area of the seal and reducing the risk of leakage.
Cross-sections of the old and new strips
Increased contact surface afforded by the new strip
Shaded = PUR adhesive.
The light line shows the windshield supports attached to the strip.