850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Remove wiper motor. Pull it out from inside engine compartment.
Installation:
-
Install wiper motor, wiper motor screws, front connector and strip underneath headlight, match up guide pin and push it into place.
-
Make sure that hoses and leads do not get pinched.
-
Connect washer motor connector and install in clip as before.
-
Install washer hose.
-
Install wiper arm.
NOTE: Before installing wiper arms, check that motor has returned to off position of its own accord and that washer hose is not being pinched.
-
Install nut hand tight.
-
Adjust position of wiper arm so blade is against the top of the stop when tightening. Torque setting 4 Nm (3 ft.lbf).
-
Test headlight wipers.
