850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Undo DLC (Data Link Connector) from mounting in control module box.
-
Remove upper mounting screw from control module box.
-
Remove cover from control module box, open metal clip with screwdriver.
-
Bend out clip on underside of control module box so that center section of control module box comes free.
-
Pull center section of control module box up carefully.
-
Remove connecting support to control module box rear air inlet.
-
Remove rear mounting screw.
-
Pull lower section of control module box back so it comes free of body plate section on the front of the control module box.
-
Pull control module box backwards and lift cable duct up to expose wiper motor.
-
Remove wiper motor. Pull it out from inside engine compartment, turn wiper motor 1/2 turn to make it easier to remove.
Installation:
