volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Alarm System - False Alarm Activation|Page 9497 > < Alarm System - False Alarm Activation|Page 9491
Page 1
background image

Windshield Washer Spray Nozzle: All Technical Service Bulletins
Alarm System - False Alarm Activation

Service Bulletin 
Cars

855/V70-2000/V70 XC
1994-2000

Section
3
 
Group
36

No. 
0019

Year
01 

Month
09

Rear windshield, alarm wire, repair

Background:

False alarms caused by an open circuit in the rear windscreen alarm wire may be due to a mixture of salt and water forcing its way between the glass and
the washer nozzle seal and causing corrosion.

The open circuit can be localized using a ohm meter. The open circuit can be repaired using conductive paint. A template and brush are supplied when
conductive paint is ordered.

If the false alarm is caused by corrosion, replace the washer nozzle with one with an improved seal. The method can also be used for repairing the 
antenna and heating loops on some rear windscreens. (See Service Bulletin 84-0014).

New improved washer nozzles were introduced from chassis number 711680.

Affected vehicles

Materials

Alarm wire, open circuit, repair 

Localize the open circuit in the alarm wire

1

Switch off the ignition.

Remove:

-

the panels on the tailgate, see VADIS:

Repair and installation instructions Function group 85 "Tailgate"

-

the washer nozzle

Alarm System - False Alarm Activation|Page 9497 > < Alarm System - False Alarm Activation|Page 9491