850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Repairing the alarm wires
4
Note!
Shake the conductive paint container well before use.
Apply conductive paint to the broken element three times at intervals of five minutes.
Coat approximately 5 mm (0.2") either side of the break.
Thinners can be used when cleaning (if necessary).
Note!
The paint on the repair has to dry for 30 minutes before removing the template.
Install:
-
the new washer nozzle
-
the panels
Checking the function of the alarm
5
Erase any diagnostic trouble codes (DTCs) that apply to the alarm system.
Carry out a function check of the alarm.
Close all doors and hatches, set the alarm.
The fault has been remedied if there is no false alarm and diagnostic trouble codes (DTCs) no longer remain.
WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.
