850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
1.
The holes marked (1) should be sealed with sealant cover P/N 9170187-0.
2.
The holes marked (2) should be filed into a square shape. Use plastic nut P/N 9132846-8 as a template.
3.
The holes marked (3) should be filed into a square shape. Use clip P/N 3511468-5 as a template.
4.
The hole marked (4) should be filed into a square shape. Use clip 6818065-2 as a template.
5.
A hole 8 x 12 mm (5/16" x 15/32") should be marked (5) as shown in the illustration above.
6.
Punch marks on markings (6). Drill square 9 x 9 mm (23/64" x 23/64") holes for box nuts P/N 946947-9.
Rear Door
