volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Engine Cooling Fan - Revised & Replacing|Page 6575 > < Engine Cooling Fan - Revised & Replacing
Page 2
background image

Remove air duct to air cleaner (ACL) housing. 

Remove 4 screws holding the fan shroud and relay bracket.

Remove relay bracket and disconnect engine cooling fan (FC) connector from relay.

Remove cover from throttle pulley.

Turbocharged engines: Disconnect charge air hose from charge air cooler (CAC).

Remove cable from 2 clips on cover. 

Disconnect vacuum hoses from cover. 

Remove vacuum valve from cover. 

Disassemble engine cooling fan (FC) connector. 

Remove engine cooling fan (FC) with shroud.

AA4

Replacing engine cooling fan (FC)

Remove 4 screws and remove engine cooling fan (FC) 

Replace engine cooling fan (FC)

AA5

Installing engine cooling fan (FC)

Install new engine cooling fan (FC).

Tighten 4 screws.

AA6

Engine Cooling Fan - Revised & Replacing|Page 6575 > < Engine Cooling Fan - Revised & Replacing