850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Receiver Dryer: Technical Service Bulletins
A/C Receiver - Installing/Aligning
SECTION
8
GROUP
87
NO.
826
DATE
Aug. 1996
Installing and aligning new air conditioning (A/C) receiver
850
REFERENCE: TP 3186112, SECTION 8 (87) CLIMATE CONTROL; 850 1992-
Installing and aligning new air conditioning (A/C) receiver
A new receiver, P/N 6128740-5 with a new type of mounting bracket was introduced into production from model year 1994. Only the new type of
mounting bracket (two part, P/N 9137408-2 and 9137409-0) is available as a replacement part.
This Service Bulletin describes how to install and align the new mounting bracket on model year 1993 cars with the older type of receiver. Refer to table
below for proper receiver/bracket combinations.
Hold the receiver clamp to the member by the upper mounting hole as illustrated.
Mark up holes by the hook on the clamp. The hole should be 92-94 mm (3 5/8" - 3 11/16") below the top of the member.
