volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Turbo Boost Gauge > < Transmission Mode Indicator - A/T|Description and Operation
Page 1
background image

Transmission Shift Position Indicator Lamp: Service and Repair

-

Turn ignition off.

-

Handbrake on.

-

Remove ashtray (2 TORX screws) and cigarette lighter compartment (2 TORX screws) and tunnel console as per Tunnel Compartment (Console)
Removal Procedure. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair

-

Pull bulb holder by the side of the gearshift down and remove contacts.
For bulb type, see Bulb Type. See: Lighting and Horns/Service and Repair  Bulb and holder form a single unit and cannot be separated. 

-

Replace lamp.

-

Refit bulb holder.

-

Refit tunnel console. Take care to avoid cracking.

-

Connect connectors.

-

Test Operation.

-

Screw tunnel console in place and refit cover as per Tunnel Compartment (Console) Installation Procedure. See: Body and Frame/Interior
Moulding / Trim/Console/Service and Repair

-

Install and tighten cigarette lighter compartment and ashtray compartment.

Turbo Boost Gauge > < Transmission Mode Indicator - A/T|Description and Operation