850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
EGR Valve: Service and Repair
EGR VALVE REPLACEMENT
Removal of Engine Cooling Fan
^
Remove / Disconnect:
-
Cover above Throttle Body (TB) pulley.
-
Upper charge-air pipe from Charge Air Cooler (CAC).
-
Air intake and intake hose from Air Cleaner (ACL).
-
The two screws attaching the EVAP valve to the engine cooling fan shroud.
-
Engine cooling fan shroud mounting screws (four).
-
Air duct to ECM box.
-
Bend back the cover a little, pull out the relay holder and separate the connectors for the fan; place the relay holder across the intake manifold.
-
Fan shroud spacers.
-
Fan and shroud.
^
Protect radiator with shield, P/N 9995474.
Release the Hoses and Couplings
^
Remove the lower CAC pipe.
^
Disconnect the EGR temperature sensor and withdraw the sensor's connector from the holder.