850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Replacing the Shiftlock microswitch
Set the gear shift lever to position P.
Turn ignition key to position I or II.
Detach the Keylock operating cable from the gear shift mounting at the adjuster (1) and the link arm (2).
Separate the solenoid connector (3) and remove from the gear shift mounting.
Set the gear shift to position L.
Remove solenoid microswitch:
-
remove the solenoid lock catch (1).
-
remove the solenoid.
-
remove the microswitch clip (3). Press the catches together.
Remove the clip from the microswitch.
Open the secondary locking on the connector
Remove wire (A) from connector (B). Use special tool 981 4229-2 or 951 2632-2.
