volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T|Adjustments|Page 1402 > < Transmission Position Switch/Sensor, A/T|Adjustments|Page 1400
Page 2
background image

-

Separate the connector on transmission.

-

Disassemble connector. Remember rubber gasket.

-

Disconnect cable clamps and detach connector from transmission.

-

Remove sockets from connector casing.

-

Remove rubber seal from connector.

-

Insert screwdriver between casing and socket and press catch in. At the same time slide the sockets out of the casing.

Detach socket for gear position sensor (8-pin) from other sockets.

-

Remove gear position sensor.

Reassembling

-

Reassemble position sensor socket with the other sockets. 

-

Reinstall sockets in casing and put rubber seal back in place. 

-

Reinstall connector on transmission.

Transmission Position Switch/Sensor, A/T|Adjustments|Page 1402 > < Transmission Position Switch/Sensor, A/T|Adjustments|Page 1400