volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Preliminary Checks|Page 6211 > < Preliminary Checks|Page 6209
Page 3
background image

Camber 

NOTE:  Correct value -1° ± 0.5°.

If the camber angle is outside these parameters check that the trailing arms are not damaged.

Toe In 

Check that the instruments on the front and rear axles are aligned. This is important as it allows toe in to be checked/adjusted in relation to the
symmetrical axis of the car. Correct value 0.07° (4.2') measured over both wheels. Maximum deviation 0.09° (5.4') per wheel.

Preliminary Checks|Page 6211 > < Preliminary Checks|Page 6209