850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
-
Reinstall cable clamps around cable harness and rubber seal.
-
Reinstall upper connector section.
-
Remember rubber gasket.
REINSTALLATION AND ADJUSTMENT OF GEAR POSITION SENSOR
Reinstallation
-
Reinstall gear position sensor.
-
Tighten sensor screws lightly.
-
Reinstall rubber washer, lock washer and nut on control shaft connector.
-
Tighten nut.
-
Lock nut with lock washer.
Adjustment
-
Adjust gear position sensor refer to Adjustments steps 2 and 3. See: Adjustments
Reinstallation, continued:
