850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Window should not press door frame outward when uppermost position is correctly adjusted.
Adjust window longitudinally.
-
Lower window sufficiently to allow winder mechanism arm to be detached from rail.
-
Adjust window by releasing locking tab on arm attachment with screwdriver and moving attachment to next `click' position along rail. Press home
arm. If further adjustment is required, drill new hole in rail using 2 mm (5/64") bit.
-
When correctly adjusted, window should travel up and down smoothly without sticking in frame.
Parallel adjustment of top edge.
-
Top edge of window should be parallel with door frame. Maximum permissible tolerance is 1 mm (3/64").
-
Winder mechanism can be adjusted vertically by undoing nut (A). Downward adjustment moves top rear corner of window backward/downward.
-
Retighten nut and check that top of window is parallel with top of door frame.
-
Upper illustration shows location of nut in front door and lower illustration corresponding location in rear door.
-
If further adjustment is required, slacken winder unit bolts and adjust unit downward at rear.
-
Hole for adjusting nut (A) may be filed out if further adjustment is required.
