850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Windshield: All Technical Service Bulletins
Body - Corrective Action for Corrosion Under Windshield
SECTION
8
GROUP
81
NO.
812
DATE
Dec. -97
Corrective action for corrosion under windshield 850
REFERENCE:
TP 32395/2 SECTION 8(81,84) BODY AND GLASS; 850 1992-
Corrective action for corrosion under windshield
Background:
Corrosion can occur at the welded Joints which are at the corners of the the flanges under the windshield. This is caused by small amounts of damage
caused to the primer when masking tape is removed after painting.
Steel brushing has been introduced into production to provide better adhesion for the primer.
Chassis no.:
855:
6500 - 137000
854:
87000 - 237000
Amount required of materials:
9139153-2
Primer
9139300-9
Thinner
1277888-2
Undercoat
1277010-3
Hardener
1161386-6
Enamel primer
Warning!
Read through the information sheets about the chemical products for. information about any health risks and protective measures and/or clothing
required before starting work.
Method
When replacing windshield, inspect the spot welds for corrosion.
Remove any corrosion by grinding or blasting.
Clean the surface and apply primer, P/N 9139153-2.
Use 50% thinners, P/N 9139300-9.
When the surface is dry apply the 2-component undercoat, P/N 1277888-2.
Use 50% hardener, P/N 1277010-3, and thinners, P/N 9139300-9.
Ensure that the paint is completely dry before bonding the new windshield.
Before using the adhesive use enamel primer, P/N 1161386-6, on the surface.
If the car is to be painted with a color coat the flanges must be masked.
For replacing windshield see:
Service Manual Section 8 (81, 84)
TP 3184012
Body and Glass
