850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Windshield Washer Pump: Service and Repair
Rear Windshield Washer Pump
NOTE: Reinstall special radio interference suppressor kit if fitted.
Removal:(Rear windshield washer motor is changed from underneath car.)
-
Ignition off.
-
Remove washer motor from bracket, bend clip out on side of bracket and pull pump downwards.
-
Undo connector and hoses from motor.
-
Remove washer motor bracket, pull outwards and turn 1/4 turn so it comes free.
Installation:
-
Install washer motor bracket, line up guide pin on top and turn bracket 1/4 turn clockwise so pin on underside of bracket locks it in the vertical
position.
-
Install washer motor. Make sure that bracket clip catches on underside of washer motor.
-
Connect connector and hoses to washer motor.
-
Check that washer motor works.