940 L4-2.3L SOHC VIN 88 B230F (1992)
Disconnect 35-pin connector from module.
Cut tie securing rubber protector and fold aside protector.
Remove protective cover from connector.
Modify 35-pin connector as follows:
Remove grey-black (GR-SB) lead from position 32 in connector.
Cut lead 1-3/4" from connector entry as illustrated.
Remove green-yellow (GN-Y) lead from position 15 in connector.
Cut lead 3-1/4" from connector entry as illustrated.
Remove green-red (GN-R) lead from position 14 in connector and insert in position 15.
Caution:
