940 L4-2.3L SOHC VIN 88 B230F (1992)
Temperature Sensor (Gauge): Testing and Inspection
Temperature Gauge Sensor Fault Tracing
-
Check between the two poles of the connector.
-
Lower sensor into water until threads are covered.
NOTE: Sensor and thermometer must not touch the bottom of the vessel. Always allow the temperature to stabilize before taking readings.
Temperature
Resistance
60 °C (68 °F)
560 ohms
90 °C (194 °F)
206 Ohms
100 °C (212 °F)
153 Ohms