940 L4-2320cc 2.3L DOHC B234F (Can) (1993)
Kickdown cable, inspection/adjustment
Check that cable:
- is seated in groove in pulley
- is taut in idling position without exerting pull on pulley
- moves easily in sleeve
Pull cable out approx. 10 mm (3/8 in) and release suddenly. Metallic click should be heard from kickdown cam (in gearbox) as it returns to idle position.
Cable over-taut: No clicking sound.
Cable slack: No kickdown action.
Correct by adjusting cable tensioner.
NOTE: Throttle pulley must return to stop as described above.