940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Radio/Stereo: Service and Repair
Resetting Anti-Theft Radio
The radio features anti-theft circuitry. While the unit is powered but the ignition is OFF (key removed), the "CD" indicator lamp (13) flashes to indicate
the anti-theft system. If the set is removed from the vehicle or if the battery power is disconnected, a special code must be entered to enable operation of
the set.
Refer to the radio code card supplied with your vehicle or ask your dealer for the correct code.
To Enter The Code
When the set has been disconnected from power the set displays "cod" after being switched on. The "cd" indicator lamp (13) flashes. Enter the 6-digit
code using the preset buttons (10). Please note that only 4 digits will be seen in the display. Press the "aut" button (9). Do not press "aut" until you have
entered the correct code. If the correct code is entered "on" is displayed and the set is now ready for use. If you enter an incorrect code you must enter
the correct code from the beginning again.
Incorrect Code
If an incorrect code is entered "rpE" is displayed. Enter the correct code. Once you have attempted to enter an incorrect code three times the set locks
and remains locked for 1 hour. "OFF" is displayed.
The unit must be connected and turned on during this time.
Enter the code again once this time has elapsed.
