940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley (Vibration Damper), Replacement
Special tool: 5284
Remove:
- battery earth lead
- alternator drive belt
- radiator fan and pulley
- fan shroud
- servo pump and (if fitted) AC compressor drive belts
Remove crankshaft pulley (vibration damper) from crankshaft
Lock pulley using counterhold 5284.
Secure counterhold using implement such as drift placed against cylinder head over coolant pump.
NOTE: Counterhold 5284 must not be locked against pump throat.
Replace pulley on crankshaft
Use counterhold 5284.
Check that slot in damper engages projection on timing belt pulley.
Secure counterhold using implement such as drift placed against auxiliary mounting bracket. Tighten crankshaft bolt in two stages:
1. Tighten to 60 Nm (44 ft.lb).
2. Tighten through further 60°.