940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Slacken tensioner locknut
Remove protective rubber cap in transmission cover.
Slacken locknut.
Turn crankshaft clockwise through one revolution
Camshaft pulley markings should again coincide with markings on transmission mounting plate.
NOTE: Engine must not be rotated counter-clockwise during belt tensioning procedure.
Turn engine further clockwise
Turn engine until camshaft pulley markings are 1 1/2 teeth past markings on transmission mounting plate.
NOTE: Rotate crankshaft smoothly.
