940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
C6
Connecting and mounting control module in cars without SRS (Airbag) and knee bolster
-
Connect control module and cable harness connectors.
-
Apply three strips of butyl tape to the control module.
-
Install control module to dashboard side section with butyl tape.
C7
Connecting and mounting control module in cars with SRS (Airbag) and knee bolster
-
Install control module on front of air hose under glove compartment with butyl tape and cable ties round duct and control module as illustrated.
-
Attach cable harness to existing cable harness at side of SAS (Airbag) module with 2 cable ties, one as near to the connector as possible to avoid
vibration on uneven road surfaces.
C8
Fastening cables In cars without SRS (Airbag) and knee bolster
-
Attach cable harness to existing cable harness with 2 cable ties, one as near to the connector as possible to avoid vibration on uneven road surfaces.