940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Check belt tension
Use gauge 998 8500. Measure tension above location of dismantled idler.
Belt tension should be 3.8 ± 0.2 units at 20°C (68°F).
If belt tension is too low: Correct by adjusting tensioner clockwise.
NOTE: Tensioner may be adjusted clockwise only. Only small adjustments are required.
If belt tension is too high: Turn crankshaft through one revolution and recheck/ adjust belt tension.
Install:
- guide (i.e. ensure that guide is in position)
- middle transmission cover (3)
- fan shroud
- heater hose tie
- radiator fan and pulley
- all auxiliary drive belts
- battery (-) lead
