940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
-
Camshaft holding tool 5416.
NOTE: Due to tension from partially opened valves, both camshafts will not remain properly aligned while installing the timing belt. Tool
5416 is used to hold the camshafts in the correct position while the timing belt is being installed.
Balance Shaft Belt With Tensioning Roller
-
Metric Hex wrenches (for tensioning balance shaft belt).
-
Timing light (for measuring timing before and after).
-
Vacuum gauge (for measuring engine vacuum levels before and after).
-
Torque Wrenches:
-
Low Range (0-50 ft-lb).
-
Full set of Metric sockets and wrenches.
-
Fender covers.
