940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Reading: approx. 12 volts
14.
If not, repair red wire leading to the battery.
15.
Connect the voltmeter to suppressor relay connector #3 and ground.
Reading: approx. 12 volts
a. If reading is 12 volts, relay is working correctly.
b. If reading is different, replace and retest with new suppressor relay.
16.
Disconnect the test equipment. Remove the #1 fuse and reconnect the ECU and all other connectors, install the kick panel and glove compartment.
Ensure that the rubber seal in the ECU connector is installed before it is connected to the unit.
17.
Reinstall the #1 fuse.